How do I order? (and pay)
- eMail me with the bits you want (and any questions) your delivery address, and mobile phone number.
- add your credit card number... (just the number) THEN when I respond to your email and confirm delivery dates, you can send me your expiry date and the security number off the back.
- Credit Card has been very successful over 14 years without any problem.
- PayPal Yes I can do that AND it is the only method I use with one client. It is a bit of a pain though at my end so I try to stay away from it.
|
Direct Credit
|
Lifetime Warranty Guarantee
My lifetime.... If it fails I'll fix it at no charge to you...
- Freight is on a "no fault" basis. You pay the freight to me and I'll pay the freight back to you. That is:-.. You send it courier... I'll send it back courier. You send it snail-mail I'll send it snail-mail
- International.. Important.. Put on your docket "damaged goods for repair" AND "Value $20" This will save agro at my end with the "Men in black"
Exceptions.
- Consumables like end faces
- Wear and tear
- Stuff that might be covered by your household insurance like:-
- I lost it
- The dog chewed it
- Someone ran the car over it
- The burglar used it to pry open a window
- After they found it in the duck-pond it was wet.
- BTW I didn't have to invent these exclusions.. All true!
|
|
|
|
Removing your head.... (ouch !!) ...
When the time comes to remove your head (for travel or upgrading)
- Undo the screw on the bottom about 5~6mm that's about 4 turns.
- (Lefty~loosy)
- Now find some smooth concrete (no not the kitchen lino) and ...holding the mallet by the top of the handle... jerk quickly downwards.
- So that the head screw smacks into the concrete.... and the head keeps going.
- Undo the screw fully and slide the head off the shaft.
If the handle won't come off... then the best thing is to give me a call
|
|
When the time comes to reassemble...
-
Give the spigot (the bit that goes into the head) a wipe with some anti corrosive like lanolin (Vaseline , Hand cream or even sunscreen is ok)
-
Then slide it all together and reassemble with the bottom screw and your Allen Key
-
(Righty~Tighty) 1/4 Turn final
|
|
Can I start with a Horus head
then change up later ?
- Your Horus is fully interchangeable with the CarbonX and the BlackBirds so you can upgrade whenever you are ready
|
|
How do I measure the length of a handle ?
Always measure from the ground.
If I ask "How tall are you?"... I bet you measure your height from the ground.
- So... do the same with your mallet... measure from the ground to the top
- You might be surprised how many measure from the top of the head.
- I wonder if they measure their own height from the top of their shoes ?
|
|
He said the handle should come up to my belly button !
That would depend on several things...
- What style do you play ? Solomon's, Standard, Irish.
- Irish will be a shorter handle. (790~860) Most popular .840
- Solomon's and Standard will be longer (often 890~1.050) Most popular .910
- Do you stand upright ? Players of a certain age should avoid bending over.
- Keep your hands to the top and together.
- Notice there is a spare inch ~25mm in the two right hand photos.
- Always measure from the ground.
|
|
He said I need a 3 pound mallet !
Ah huh... This is a carry-over from last century.. probably in the 70's and before when most mallets had wooden handles that were glued in. The mallets were weighed as a complete item... Handle and head all together. These days we tend to measure the weight of the head. 1kg=2lb 3 (and a bit) ounces.
- The head is the bit that does the work. (Hammer and nail)
- Balls weigh one pound (16oz) each.. 2 balls weigh 2 pounds
- Handles don't really weigh very much these days.
- Horus heads weigh ~2lbs, CarbonXtremes 2lb3oz, BlackBirds Rainbows 2lb5oz
- For G.C. go lighter (Horus or other "Light")
- For A.C. go to 2lb3oz~whaterver rocks your boat.
- What do I play with? AC & GC, 12.5" (310mm) 0.950kg. (just over 2lbs)
- Most popular? CarbonXtreme 280, 1kg.
|
|
I want a handle shape .....
- That is thicker~thinner~squared~shaped for comfort... What can you do for me?
- I've put some videos on youtube that show how to do some of these things
- If that doesn't work, just give me a call and we'll have a chat.
|
|
- Send me an email... [email protected]
- Text me on 843-422-7766
- Phone me on 843-422-7766 (don't leave a message )
|